The shaft end machining of the ball screw is very important. Whether you are single-shaft or dual-shaft machining, the size must be in line with the actual use of the screw. In this way, the stability of the screw rod in work can be ensured.
The ball screw does not bear the load during use, it only plays the role of transmission distance. After connecting with the motor, according to the power of the motor
The speed and lead of the lead screw control the speed of the machine. During the rotation of the motor, the screw often has torque. At this time, the machining size of the shaft end becomes very critical. Too large a size will waste motor power, and too small a size will cause the lead screw to break. The proper size is very important.
Under normal circumstances, many customers will make their own drawings, and professional engineers will calculate each size and mark them on the drawings. At this time, we can process it very labor-saving, only need to process according to the drawings provided by the customer. However, sometimes the customer does not understand these issues and only provides the diameter of a screw rod, and other data is controlled by us. For example, if the diameter of the screw rod is 40mm, we can choose the diameter of the shaft end to be 30mm, which can be installed in the bearing position of the screw rod support seat at this time. The length of the shaft end processing should be determined according to the working environment provided by the customer and the size of the installation part. Our company has professional technicians and processing masters, and we can let customers use products that are assured and satisfactory in the shortest time.
Our aim is to serve customers 24 hours a day.
