After the block has moved for a period of time, it is found that the bearing end cover and end dustproof are deformed or cracked. It may be that the incorrect installation method will make the block and the track have only one-sided bearing force, or it may be caused by external force damage. Deformation or cracking of the bearing end cover and end dustproof.
Prevent proposals:
1. Poor interior of the block, solution: change the software of the dust-proof system, improve the lubricant, increase the amount of lubricant, and reduce the time interval of lubrication.
2. The main parameters and solutions for unsuitable work: certification of technical calculations, improvement of product equipment, and installation angle problems.
3. The load capacity is incorrectly distinguished and the total number of equipped blocks is wrong, the solution: the improvement of the product equipment.
After a period of application, it was found that the track of the slide rail was imprinted and the rigid beads were cracked. The key reason was the load. The rigid beads got rid of the track, causing the rigid beads to crack and cause continuous damage to the track. Prevent proposals:
1. The service life of the rated value ends, and the solution: dismantle and replace the new product.
2. Load condition, solution: apply a larger block, increase the total number of blocks, reduce external load, improve installation skills, and reduce unilateral bearing capacity.
3. Insufficient lubrication, solution: change the lubricating oil, increase the amount of lubricating oil, and reduce the lubrication interval.
4. Dirty stuff enters the block, and the solution: improve the sealing parts (double dustproof, lower dustproof, etc.).